undergraduate
graduate
doctoral
CZM-based FE numerical study on pull-out performance of adhesive bonded-in-rod (BiR) joints for timber structures
Experimental Investigation of Cross Laminated Timber Elements with Holes or Notches at In-Plane Beam Loading Conditions
Mechanical and Fire Performance of Innovative Hollow Glue-Laminated Timber Beams
Compressive Strength Properties Perpendicular to the Grain of Hollow Glue-Laminated Timber Elements
ssessment and rehabilitation of existing structures - The ARES project
LOAD-BEARING COMPOSITE TIMBER - GLASS WALL PROTOTYPE IN FIRE CONDITIONS
Influence of elevated temperature on glued-in steel rods for CLT elements
Influence of Friction on the Behavior and Performance of Prefabricated Timber–Bearing Glass Composite Systems
Behavioral Assessment and Evaluation of Innovative Hollow Glue-Laminated Timber Elements
Assessment of Timber Roof Structures before and after Earthquakes
Nikola Tesla Technical Museum in Zagreb - recording and documentation techniques for protection, maintenance and new AR and VR content
A review on failure theories and simulation models for adhesive joints
Experimental and Numerical Analysis of Continuously Coupling Timber-Lightweight EPS Concrete Composite System
Short-Term Analysis of Adhesive Types and Bonding Mistakes on Bonded-in-Rod (BiR) Connections for Timber Structures
Seismic and Energy Renovation of Masonry or RC Framed Buildings with Timber or Composite Timber Panels
Advancement in prediction of shear strength and stiffness of cross laminated timber beams
Analytical and Numerical Verification of Vibration Design in Timber Concrete Composite Floors
Methods used for Inspection and Condition Assessment of Timber Atructures
Basis of Guidelines for Structural Design and Thermal Assessment of Buildings with Hybrid CLT-Glass Elements
Thermal and Energy-Efficiency Assessment of Hybrid CLT–glass Façade Elements
Response of laminated glass-CLT structural components to reverse-cyclic lateral loading
Shear strength of in-plane loaded cross laminated timber beam elements –experimental and theoretical investigation
The Numerical Analysis and Experimental Verification on the Thermal Performance of Hybrid Cross-Laminated Timber (CLT) - Glass Facade Elements
Multipurpose Hybrid Panels from CLT and Structural Glass
Seismic Design of Timber Buildings: Highlighted Challenges and Future Trends
Brittle failure modes in reinforced and non-reinforced timber joint with large diameter fastener loaded parallel to grain
Cross laminated timber at in-plane beam loading – Comparison of model predictions and FE-analyses
Experimental and numerical investigations of cross- laminated timber elements at in-plane beam loading conditions
Numerical Models for Verification of Bearing Capacity of the Hybrid Timber-Structural Glass Panel
Optimisation Test Study of Connections and Joints Between Elements of the Hybrid Timber- Structural Glass Panel
Energy Efficiency of CLT Frame with Laminated Glass Innfill
Textiles and Fabrics for Enhanced Structural Glass Facades: Potentials and Challenges
Energy evaluation of CLT - GLASS COMPOSITE
NUMERICAL MODELLING AND FINITE ELEMENT ANALYSIS OF FRICTION IN PREFABRICATED WOOD – BEARING GLASS COMPOSITE SYSTEMS
Energy characteristics of CLT – glass composite
Behaviour of Cyclic Loaded Joint Made With Glued- in Rod in Corner of CLT Frame
Energy Evaluation of CLT - Laminated Glass Composite
In Situ Advanced Diagnostics and Inspection by Non-destructive Techniques and UAV as Input to Numerical Model and Structural Analysis - Case Study
Decision analysis and scenarios for the assessment of existing timber structures
Cultural Heritage BIM: Challenges and Opportunities
Evaluator's experience
Approaches to Cultural Heritage Documentation and Interpretation
Cross-laminated timber (CLT) – a state of the art report
Cross laminated timber at in-plane beam loading – New analytical model predictions and relation to EC5
The behavior of the cyclic loaded joint in the corner of a timber frame made of glued-in rods
Influence of friction on the behaviour and performance of prefabricated wood – bearing glass composite systems
Practitioners’ opinions about the EN 1995 – German point of view in comparison with the rest of Europe
Drveni neboderi - Uporaba novih materijala od drva u visokogradnji
ISSUES AND PROBLEMS IN EUROCODE 5 - COMPARISON OF CROATIAN AND EUROPEAN OPINIONS
REVIEW AND EVALUATION OF DESIGN APPROACHES FOR GLUED -IN RODS IN EAST AND WEST EUROPE
MODELLING OF DUCTILE JOINTS IN HYBRID SYSTEMS MADE OF TIMBER AND STRUCTURAL GLASS
Structural Concepts for Adaptive Facades
Condition Assessment of Timber Structures – Quantifying the Value of Information
In situ advanced diagnostics and inspection by non-destructiive techniques and unmanned vehicles as input to numerical model and structural analysis- case study Technical museum Nikola Tesla in Zagreb
Future challenges and need for research in timber engineering
An innovative methodology of assessing the climate change impact on cultural heritage
Laminated glass - timber panel as a dissipative bracing structural component for existing frame structures
Part IV Geospatial: Chapter 11, Data collection for estimation of resilience of cultural heritage assets
Reconstruction of the Technical Museum and new exhibition
Structural analysis of in-plane loaded CLT beams
Creation of the point clouds & basic 3D model using AVR for the demo cases: Technical Museum Nikola Tesla in Zagreb and Cultural Heritage Municipality of Unešić
Renovation of the wooden structure of the Technical Museum Nikola Tesla in Zagreb - a major and a performance project
In-plane loaded CLT beams - Tests and analysis of element lay-up
Assessment and structural health monitoring of heritage timber structures
Technical museum Nikola Tesla in Zagreb - Temporary structure which last seven decades
Inspection and condition assessment of existing timber structures
Timber – Structural Glass Composite Systems
Risk and Resilience of Cultural Heritage Assets
Construction of the supporting structures of glass and the current state of regulation in this area
Making of models for research, documentation and multimedia presentation using combined 3D recording techniques
Numerical Evaluation of Seismic Capacity of Structures with Hybrid Timber-Glass Panels
Highly energy dissipative and ductile timber-glass hybrid element
Digital Heritage. Progress in Cultural Heritage: Documentation, Preservation, and Protection - 6th International Conference, EuroMed 2016, Nicosia, Cyprus, October 31 – November 5, 2016, Proceedings, Part I
Digital Heritage. Progress in Cultural Heritage: Documentation, Preservation, and Protection - 6th International Conference, EuroMed 2016, Nicosia, Cyprus, October 31 – November 5, 2016, Proceedings, Part II
Structural design of timber buildings exposed to fire - national building regulations and European technical guidelines
Risk and resilience of cultural heritage assets
Structural analysis of in-plane loaded CLT beam with holes: FE-analyses and parameter studies
Structural design of timber buildings exposed to fire – national building regulations and European technical guidelines
Pull-compression tests on glued-in metric thread rods parallel to grain in glulam and laminated veneer lumber of different timber species
Glued-in rods in beech laminated veneer lumber
Timber-structural glass composite systems in earthquake environment
New perspectives of use wood in structures
Assessment of the pull-out strength of glued-in rods with different test methods
Pull-compression tests on glued-in rods parallel to grain in laminated veneer lumber of different timber species
Experimental Assessment of the pull-out strength of glued in rods set parallel an perpendicular to grain
Glued-in rods
Experimental investigation of laminated glass infilled CLT frames with glued-in steel rods in joints
Increase of seismic capacity of frame structures with hybrid timber-glass panels
Intervention Decision Making Based on EU Cultural Heritage Identity Card
A contribution to the built heritage environmental impact assessment
Work on the second generation of Eurocode 5
Digital Technology and Heritage Preservation
Documenting of Cultural Heritage
Examples of successful Horizon 2020 projects - INCEPTION, Horizon 2020 project theme REFLECTIVE-7
Design of glued-in rods
Influence of long term load on timber-concrete composite systems
Strengthening of timber structures with glued-in rods
Timber-load bearing glass composite in earthquake environment
Reinforcement of timber structures - The route to standardisation
Reliability of timber structures exposed to fire
Structures made of structural glass - state of the art and normisation process
Timber-concrete composite structures
Large diameter fastener in locally reinforced and non-reinforced timber loaded perpendicular to grain
Guidance for European Structural Design of Glass Components
Analysis of hysteretic response of glass infilled wooden frames
Activity report of COST action TU0905 working Group 1: predicting complex loads on glass structures
Assessment and Structural Rehabilitation of the Technical Museum in Zagreb
Modelling of Joints Behavior in Wood Composite Structural Systems
Mandate M515 Project: Second generation of Structural Eurocodes
Examples in timber engineering
Ductility analysis of laminated timber beams of small section height
Parametric analysis of large diameter mechanical fastener in reinforced glulam
Surface monitoring measurements of materials on environmental change conditions
Passive fire protection measures - Evaluation of the fire resistance of timber structures with regard to the requirements of Eurocode
Structural glass
Construction of wooden skyscrapers in Croatia - is it possible? What legal frameworks exist and which can still be adopted?
Seismic Behaviour of Composite Panel Composed of Laminated Wood and Bearing Glass - Experimental Investigation
Simulation of earthquake load imposed on timber-glass composite shear wall panel
Comparison of design rules for glued-in rods and design rule proposal for implementation in European standards
Truss girder joint with a large diameter mechanical fastener
Learning from Case Studies: Timber Tower of Gospić Cathedral and traditional timber church
Reconstruction of the Technical Museum in Zagreb
Correlation between destructive and four NDT techniques tests on historic timber elements
European Union - Cultural Heritage Identity Card
Croatia – presentation of Eu-Chic relevant cultural heritage documentation system
Smart Monitoring of Historic Structures - FP7 SMooHS project
Proceedings of the EU-CHIC International Conference on Cultural Heritage Preservation
Identity Card of Cultural Heritage: How to Collect and Organize Data
Robustness Analysis of Timber Truss Systems
Seismic Response of Timber Frames with Laminated Glass Infill
Shaking Table Test of Innovative Composite Panel Composed of Glued Laminated Wood and Bearing Glass
Racking preformance of wood-framed glass panels
Composite joint of timber truss girders
Laminated glass panels as a bracing elements in combination with timber frame
User friendly modular open source software for data evaluation and interpretation
Laboratory and on-site testing activities part 3 - Historical timber elements
Case Study 1: Museum Island, Berlin
Smart Monitoring of Historic Structures Case study 3: Palazzo Malvezzi
Monitoring of Historic Structures Case study 4: Zahdeh Building, Hebron, Palestine
Laminated Glass Panels in Combination with Timber Frame as a Shear Wall in Earthquake Resistant Building Design
Composite structural systems timber-structural glass and steel-structural glass
Development of Seismic Resistant Wooden Frames with Laminated Glass Infill
Laminated glass panels in combination with timber frame as a shear wall in earthquake resistant building design
Reliability of glulam beams exposed to fire
Robustness analysis of structural timber truss systems
Case study – assesment and reconstruction project of technical museum’s timber structure in Zagreb - Croatia
Robustness of structural timber truss systems
Composite materials based on wood and polymers - part one
Composite materials based on wood and polymers - Part 2
Identification of condition of timber structure of Technical museum in Zagreb
Probabilistic analysis of structural robustness
System reliability of timber structures with ductile behaviour
Reliability-based robustness analysis for a Croatian sports hall
Glass structures - part 1
Glass structures - part 2
Robustness analysis of a timber structure with ductile behaviour in compression
Expert system for checking efficiency of water management planning activities
Justification of the New Design Standards Regarding the Use of Glass Products in Civil Engineering Works
New design standards regarding the use of glass products in civil engineering works
Modern prefabricated system for wooden family house
Cyclic response of load-bearing wood-framed glass panels
The roof structure of New trade school and town hall in city of Sisak
Robustness analysis of big span glulam truss structure
Robustness analysis of timber truss structure
Architectural and structural comparisment of South American andEuropean Timber Frame Structures
Seismic behaviour of timber structures
Robustness Analysis of a Wide-Span Timber Structure with Ductile Behaviour
Seismic and fire resistance of timber structures
HZN/TO 165 Timber structures
Estimating deflection of cable stay bridges by support vector method
Analysis of Slope effect and geometry of Glulam Cambered beams – Advises for their Design and Practical Application
Innovative timber and timber composites in construction:Conformity assessment and CE marking ; Environmental impacts and energy performance
Proceedings of the International Conference on Innovative Timber and Timber Composites in Construction (Multimedia CD)
Wooden structure of the city sport hall in Samobor
European approach to sustainable protection of immovable cultural heritage
Ductility of joints in wood-composite structures
Research cooperation of Croatia and JRC in field of safety and security in Construction Sector
Smart Monitoring of Historic Structures - overview about a medium-scale research project in the EU 7th Research Framework Programme
Lightweight structures
Reliability analysis for laminated timber girders
Composite materials based on wood and polymers
Seismic behaviour of lightweight structures
New possibilities of structural design using artificial intelligence techniques
Snow and wind actions on bearing structures
Timber Structures according Eurocode
Purpose and justification for new design standards regarding the fibre reinforced polymer composites in civil engineering
Comparison of the Eurocode 5 and Actual Croatian Codes for Wood Classification and Design with the Proposal for More Objective Way of Classification
Fracture Behaviour of Bolted Joint Using Steel Threaded Bars Glued In Oak elements
Heritage protection - construction aspects
Focus Area Cultural Heritage as a part of the European Construction Technology Platform
Non-destructive assessment of wood cultural heritage objects – case study of sanation and reassignment
Glulam construction of long span in Croatia
Comparison of the Pull-out Strength of Steel Bars Glued in GluLam Elements Obtained Experimentally and Numerically
Classification of Timber
Preparation of the technical regulation for Croatian construction sector approach to european integration
Design of the wood structures according to european norms
Preparation on the technical regulation for Croatian construction sector approach to European intergration
Roof Construction of the Sport Centre in Samobor
Recent advances in smart monitoring of historic structures
Bearing capacity of glued and wound steel bars contained in oak elements
Experimental Test of the Glued Bolt Jonit Using Threaded Steel Bars
Composite Timber and Lightweight (EPS) Concrete Constructions
Computer Aided Concrete Box Girder Bridge Design
Timber Structural Design Based on Neural Networks Application nad FE 3D Modelling
FEA model of the edge crack in wood element under tensile stresses
Identification of water surfaces on satellite photographs by neural network
New possibilities of structural design using artificial intelligence techiques: Application of Neural Networks in structural modelling optimization
Continous shear connecting - the best way to compose timber and lightweight (EPS) concrete
Continuous shear connecting- the best way to compose timber and lightweight (EPS) concrete
AI Environment for Classification and Design of Structural Timber Elements
Testing composite wood and lightweight concrete girders
FEM models of composite timber-lightweight concrete floor-system
Application of mathematical modeling in design and research of timber structure
Neural Network for Classification based on Nondestructive Testing
Characteristica of Timber-Lighweight Concrete (EPS) Composites
Neural network for wood member clasification based on the results from nondestructive testings of wood samples
Nondestructive methods for wood mechanical properties determination